If you work with presses, brakes, and shears metal forming, a press brake attachment for a 12/20-ton hydraulic shop press is a direct way to add bending capability without buying a dedicated machine. Two press brake attachments are on the table, and they sit at very different prices. The decision comes down to how much bending depth and flexibility your shop actually needs. One is a lower-cost add-on for lighter stock; the other is a more substantial attachment for heavier work.
Quick Verdict
Choose the lower-priced Press Brake Attachment if you want a straightforward 90° bending tool and your work stays within its listed capacity. Choose the Eastwood Press Brake Attachment if you need to handle a wider range of stock and want more room for thicker work. The price gap is wide, so let the comparison table guide your decision. For occasional sheet metal jobs, the lower-priced attachment will likely be enough; for repeated heavy bending, the Eastwood gives you more headroom.
At a Glance
| Product | Listed Price | Max Bending Length | Max Bending Thickness | Bending Angle | Price Bar |
|---|---|---|---|---|---|
| 12-Inch Press Brake Attachment | $87.57 | 12 in. | Up to 3/16 in. | 90° | |
| Eastwood Press Brake Attachment | $299.99 | 12 in. | Up to 3/8 in. (mild steel and aluminum) | 90° |
Where Each Product Wins
The 12-inch attachment wins for shops that want a straightforward press brake add-on. It uses a 45# steel body, and it's the easier purchase for a shop that already owns the hydraulic press. If most of your work is light-to-medium sheet metal, this attachment gets the job done.
The Eastwood attachment wins when the job list includes thicker material and more complex bends. Its upper die mounting cup has a 41mm inside diameter, and the 14.5 x 7.5 x 9.25-inch footprint fits the standard hydraulic shop press format. It's the more flexible addition to a working metal shop.
12-Inch Press Brake Attachment
This attachment has a black 45# steel body with plastic spraying and blackening. The package includes one press brake attachment with a gross weight of 38.58 lbs. It's the narrower-capacity option, so it suits sheet metal projects that fit within its listed limits. You need to prepare the hydraulic press yourself and confirm the size before purchasing. If your work is in the lighter range, this attachment gives you a solid bending path.
Eastwood Press Brake Attachment
The Eastwood Press Brake Attachment is built for standard 12/20-ton hydraulic shop presses and produces variable-length bends in mild steel and aluminum. Its upper die mounting cup has a 41mm inside diameter, and the overall dimensions are 14.5 inches wide by 7.5 inches deep by 9.25 inches high. This cup is the point of attachment to your press. Choose this attachment when your bends need to go beyond light sheet metal and you want the freedom to reposition the workpiece for complex shapes. For occasional, light bending, this attachment is more tool than you need, so it suits shops with heavier or more varied work.
Final Choice by Use Case
Go with the lower-priced Press Brake Attachment when your projects stay within its 3/16-inch listed capacity. It adds a bending option to an existing hydraulic shop press without the larger investment. Go with the Eastwood Press Brake Attachment when your bends approach its 3/8-inch listed capacity. The Eastwood is the higher-capacity route for a shop that plans to use the extra depth. If you are still deciding, think about the thickest material you bend most often. That number alone will usually point you to the right attachment.
