Browse by everyday use case, then check fit, tradeoffs, and details worth confirming before you open a seller page.
Longer Ray5 20W vs 800W JPT 2-in-1: One is a lower-priced engraver/cutter for gifts, the other a high-power metal fiber laser. See which fits your laser plasma waterjet cutting work.
The Eastwood Versa-Cut 40 offers a flexible, lower-cost CNC plasma torch with dual-voltage convenience, while the Koike Aronson Cutter-II-510 delivers a large 5' x 10' cutting table for bigger production work. Here's how to choose.
Choosing between the $2,699 PowerEdge80 and the $999.99 Eastwood Versa-Cut 40? We compare 80-amp CNC-ready power and included accessories against dual-voltage flexibility and a lower entry price to help you pick the right plasma cutter.
The SCULPFUN S30 PRO laser engraver offers a complete 10W desktop cutting system at $425.39, while the waterjet nozzle 5-pack at $55.24 is a consumable refill for thin tile and glass work. Choose based on your existing setup.
Compare the $2,699 PowerEdge80 and the $1,659 Everlast PowerPlasma 82i CNC-ready 80-amp plasma cutters, including torch packages and which one fits your table setup.
A $6,299 desktop fiber laser and a $37.35 pack of waterjet ruby orifices are both serious purchases for laser plasma waterjet cutting work-just in very different ways. This head-to-head shows when to buy the complete cutting system and when the 10-piece orifice set is the smarter move.
Compare the PowerEdge120 120-amp 3-phase CNC plasma cutter with the PowerPlasma 82i 80-amp single-phase CNC-capable unit. Weigh cutting capacity, shop power, included torch setup, and the $2,640 price gap to decide.
The Eastwood Versa-Cut 40 and PowerEdge120 both handle CNC plasma cutting, but they differ hugely in price and power. This head-to-head covers the $999.99 vs $3,999.00 gap, voltage requirements, torch setups, and how to choose based on your shop's needs.
SCULPFUN S30 PRO brings a new 10W unit with air assist and a large work area; the Longer Ray5 20W offers more power and speed for less. Which fits your projects?
Two 10W laser engravers, one clear choice once you weigh price and features. The SCULPFUN S30 PRO bundles air assist at $425.39, while the Longer 10W covers a broader material list at $235.99.
PowerEdge120 and Everlast PowerPlasma 82i take different routes to CNC plasma cutting. Compare 120-amp three-phase versus 80-amp single-phase pricing and packages to find the right fit.
Comparing a complete used 5x5 CNC plasma table package with an 80-amp Thermal Dynamics cutter against a new, 40-amp CNC-ready plasma cutter. We break down cutting area, power, and price to help you decide which setup fits your shop and budget.
Choosing between the Longer Ray5 20W laser engraver/cutter and a 5-piece waterjet flat nozzle set? Compare prices, condition, and use cases to decide which one fits your shop.
PowerEdge80 vs PowerPlasma 82i: both are 80-amp CNC-capable plasma cutters, but they sit at very different price points. The PowerEdge80 lists at $2,699 with a CNC torch and accessory kit; the PowerPlasma 82i lists at $1,359. Here's how to pick.
Compare the $174.99 K15Pro 12W diode laser and the $3,999.99 OMTech AF3551-130 130W CO2 laser across workspace, cutting capability, and intended use to decide which laser engraver fits your projects.
The SCULPFUN S30 Pro handles wood, acrylic, and crafts for $425.39, while the 800W JPT fiber laser cuts and engraves metal for $6,299. This head-to-head covers engraving area, power, and which machine fits your workshop.
SCULPFUN S30 Pro pairs a built-in air-assist pump with a 410×400mm work area for $425.39; Longer RAY5 10W cuts up to 20mm wood and 30mm acrylic for $264.98. Here's which 10W engraver fits your shop.
Choosing between the new Everlast PowerPlasma 82i CNC package and a used Koike Aronson Cutter-II-510 with a 5x10 table comes down to portability vs. work area. Compare prices and specs to find the right fit.
Choosing between the PowerEdge80, a new CNC-ready 80A plasma cutter, and the Koike Aronson CNC Plasma Cutter-II-510, a used 5x10 table system, comes down to budget, workspace, and whether you need the table included.
Eastwood Versa-Cut 40 delivers CNC-ready cutting at $999.99 with dual-voltage flexibility; Everlast PowerPlasma 82i brings 80 amps and multi-process capability for $1,659.00. See which fits your shop.
Two laser engravers, one 130W CO2 production machine and one 10W entry-level model, face off. The OMTech AF3551-130 offers a large 35x50-inch bed for signage, while the Longer 10W is a budget-friendly choice for smaller projects.
The SCULPFUN S30 PRO is a complete 10W laser engraving and cutting machine with air assist. The 10-piece ruby orifice set is a waterjet replacement part. Pick the engraver for standalone cutting work or the orifices for maintaining an existing waterjet cutter.
Deciding between the Longer Ray5 20W laser engraver/cutting machine at $247.99 and the 10-piece CNC waterjet ruby orifice set at $37.35? See which one belongs in your laser plasma waterjet cutting lineup.
When you're choosing between a waterjet nozzle restock and an 800W desktop fiber laser cutter, the deciding factor is whether you need a consumable part or a full cutting and engraving system.
Deciding between a used Koike Aronson CNC plasma cutter with a 5' x 10' table and a new PowerEdge120 120-amp CNC-ready unit? We compare price, condition, and what you get.
Compare the used Wright 5x5 with Victor Thermal Dynamics A-80 and the Koike Aronson Cutter-II-510 on a 5x10 table. See which plasma cutting setup fits your shop.
A used Koike Aronson CNC plasma cutter with a 5' x 10' table vs a new Everlast PowerPlasma 82i 80-amp CNC-capable unit. See the price gap, condition difference, and which one makes sense for your shop.
We compare the large-format OMTech 130W CO2 laser engraver/cutter with the compact Longer Ray5 20W desktop machine, looking at price, work area, software, and intended use to help you choose the right laser for your shop.
Compare the Eastwood Versa-Cut 40 CNC plasma cutter at $999.99 and the Everlast PowerPlasma 82i at $1,359. We break down cutting range, CNC readiness, and value to help you decide.
From a $149.95 cutting table to a $11,442.50 CNC system, this guide compares four plasma setups so you can match the right tool to your shop.
Four cutting options span a $37 to $115,000 price range: a complete waterjet system, a used CNC plasma table, and two ruby orifice consumable packs. Here's how to match each to your shop's workload.
Compare the Longer Ray5 20W and 10W laser engraver/cutter machines by listed price, condition, and specs. Choose the right one for your engraving and cutting tasks.
Two Everlast PowerPlasma 82i 80-amp plasma cutters: one with a CNC package, one CNC-capable with a standard torch. Here's how to decide.
The Klutch Plasma Metal Cutting Table offers a 33" x 21" work area, 250 lb capacity, and a USD 149.95 open-box price. This guide breaks down what to consider before buying.
A 5-piece pack of 0.26mm ruby orifice flat nozzles for CNC waterjet cutting, matched to 0.76mm sand pipe and 80 mesh abrasive for thin tile and glass work.
From a $55 ruby orifice set to a used 5x10 plasma table, these four listings show the real range of waterjet and plasma cutting choices for shops.
From a $149.95 bench table to a $11,442.50 used industrial CNC system, these four plasma cutting options cover open-box accessories, machine-torch power supplies, and 440V CNC-ready units. Compare prices, table sizes, and power requirements before you choose.
The Everlast PowerPlasma 82i with CNC package combines an 80-amp plasma cutter and iPTM-80 CNC torch at USD 1,659.00 for CNC table builds.
The PowerEdge120 plasma cutter pairs 120 amps with three-phase input and a blowback torch that's ready for CNC table use. Here's who it fits, what's in the kit, and the trade-offs to weigh.
Comparing the $999.99 Eastwood Versa-Cut 40 CNC Plasma Cutter with machine torch to the $8,999.99 Eastwood Versa Cut 4X8 CNC Plasma Table with Cut 60 and tubing notcher. The right choice depends on whether you need a full-sheet CNC cutting system or a compact cutter that can integrate with a table.
Compare the new Longer 10W laser engraver with free air kit at $264.98 against the used unit at $208.31, same 400×400mm work area and carving materials.
A new AKS Cutting Systems WKX3S-612 with a KMT SLVI 50R intensifier is listed at USD 115,000. This guide breaks down what the package includes, who it fits, and the trade-offs to consider before buying.
A practical look at the Scotle 800W JPT 2-IN-1 desktop fiber laser: what the listed details mean for metal cutting, engraving, and personalization work at $6,299.
Four laser engravers from USD 208.31 to USD 499.00: compare Longer 10W models and a full-metal 80W CNC for wood, acrylic, and engraving workflows.
Four laser engraving and cutting machines, from a $216.29 desktop diode model to $1,699.99 fiber systems, compared for wood, acrylic, and metal marking.
A closer look at the MAX 50W fiber laser metal marking and engraving machine - its 15,000 mm/s marking speed, ±0.01 mm precision, air cooling, and 5-year warranty, and which shops it fits.
Choosing a CNC plasma setup means deciding between a stand-alone 80-amp cutter, a torch height controller, and a complete 2x2 table. Four new options from $195 to $3,599.99 show the range of gear to match your shop's setup.
Compare four fiber laser marking/cutting machines priced from $1,394.99 to $6,699.00, from 50W desktop engravers to a 1200W JPT cutting machine, and find the right fit for your metal shop.
Two Eastwood Versa Cut CNC plasma table bundles: 5x5 at USD 6,199.99 vs 4X8 at USD 8,999.99. Compare cutting area, included Cut 60 kit, and tubing notcher attachment.
Choosing between the Eastwood Versa Cut 4x8 complete kit with Cut 60 and tubing notcher at $8,999.99 and the Versa Cut 4x8 fabrication table at $7,199.99: see what the $1,800 price gap buys before you decide.
Finding more guides for you…