Choosing workholding fixturing metrology for your shop usually comes down to one question: do you need a flexible clamping set for everyday edge work, or a dedicated fixture base for rotary-table setups? The two listings here sit at opposite ends of that spectrum. On one side is a $19.95 set of eccentric cam edge clamps; on the other is a $350 aluminum dovetail fixture built to match the 5th Axis D05125 pattern. One is a quick, compact way to hold smaller parts from the edge; the other is a larger shop-made fixture for rotary-table work.
Quick verdict If you need immediate edge clamping for smaller parts, the clamp set is the straightforward pick. The larger fixture is the choice for machinists with a rotary table who want a ready-to-mount pallet-style solution.
| Product | Listed Price | Condition | Price Bar | Key Highlights |
|---|---|---|---|---|
| 5 Pack Workholding Fixture Clamps (5/16\"-18 Stud) 13/16\" Brass Hex 10201 | USD 19.95 | New | Low-profile eccentric cam edge clamps, quantity of 5 | |
| Custom Workholding Fixture with Compatible 5th Axis D05125 Dovetail | USD 350.00 | Used | Custom aluminum dovetail, M10x1.5 mounting bolts included |
Where the clamp set wins The set offers a compact, low-profile clamping approach that works well for edge work on smaller pieces. It arrives in new condition, and the multiple clamps give you several positioning options in one purchase.
Where the custom dovetail wins The fixture provides a larger base with the dovetail interface already matched to the 5th Axis D05125 pattern. That makes it a stronger candidate for rotary-table setups where repeatable mounting matters more than quick edge clamping.
5 Pack Workholding Fixture Clamps (5/16\"-18 Stud) 13/16\" Brass Hex 10201
These clamps are described as low-profile eccentric cam workholding edge clamps with a brass hex clamp and hex-socket tightening. The new condition means you can start using them without sorting through a used part. Each clamp from the set works as a compact edge clamp, which suits setups where you want to hold a workpiece from the side without taking up much vertical space. The catch is that the set is designed for that specific edge-clamping role; larger fixtures or heavier stock will need something with more mass. If you are building a dedicated pallet or dovetail workholding platform, this set is not a substitute.
Custom Workholding Fixture with Compatible 5th Axis D05125 Dovetail
This fixture is a custom piece built to match the 5th Axis D05125 pattern, and the listing includes M10x1.5 mounting bolts. For a rotary-table owner, the dovetail interface is the main attraction because it can simplify mounting compared with building a setup from scratch. The trade-off is that the fixture is used, so condition is part of the decision. It also has a specific dovetail pattern rather than being a universal base, which means it makes the most sense for shops already working with that style. If you only need a simple edge-clamping set, this fixture is more than you need.
Final choice by use case Pick the 5 Pack Workholding Fixture Clamps when you want a new, compact edge-clamping set for smaller parts. Pick the Custom Workholding Fixture with Compatible 5th Axis D05125 Dovetail when you need a rotary-table-ready dovetail fixture and are comfortable choosing a custom piece.
