Browse by everyday use case, then check fit, tradeoffs, and details worth confirming before you open a seller page.
Two solid carbide 4-flute end mill 10-packs, one with a 3/8\" cut and one with a 1/2\" cut, sit at $38.90 and $34.59. Compare prices, cut lengths, coatings, and which job each set suits.
Both 110V key duplicators are listed just over a dollar apart. The Key Cutting Machine uses a horizontal feed with a tool drawer; the Multifunction Vertical Cutting Machine adds electric/manual modes, automatic feeding, and a steel clamp. Choose based on your key types and workspace.
Need a new set of carbide end mills? Compare the 3/8" TiAlN-coated stub 5-pack with the 1/8" uncoated center-cutting 5-pack by price, dimensions, and coating to match your CNC work.
These two five-packs of carbide end mills serve different jobs: one is a 1/8" USA-made center-cutting set, the other a 1/4" TiAlN-coated long cutter. Compare them by diameter, cutting length, coating, and price to find your match.
Compare a 1/4-inch long 4-flute carbide end mill set with a 1/8-inch 4-flute solid carbide set by listed price, cutting length, and material guidance to choose the right tool for your shop.
The 8-piece set covers eight diameters for $13.79; the ONLINECARBIDE five-pack gives five identical 1/8-inch solid carbide 4-flute end mills for $36.65. Choose variety or repeatability.
Two 4-flute end mill bundles take different paths: the 8-piece set covers eight diameters for $13.79, while the ZIMI 5-pack gives you matching 1/4-inch long-reach TiAlN-coated cutters for $49.99. This head-to-head helps you pick the right one for your budget and typical job.
Choosing between a 10 lb used carbide end mill lot for $320 and a 5-pack of new 1/8" 4-flute center cutting end mills for $36.65 comes down to whether you need bulk resharpening/recycling material or ready-to-run precision tooling.
Key Cutting duplicating Machine vs Multifunction Vertical Cutting Duplicating Machine: compare listed prices, weights, and key features to decide whether a simpler horizontal duplicator or a more automated vertical machine fits your shop.
Need a key duplicator for your locksmith bench? Compare the IGANG key cutting machine at $81.83 with the multifunction vertical duplicator at $115.27 to see which one fits your workflow.
Compare the $229 SGS 12mm corner-radius set with the $34.59 1/8" TiAlN square-end 10-pack to see which end mill set fits radiused finishing versus small-diameter budget work.
Compare the $99.96 TRELI Car Key Copier and the $115.27 Multifunction Vertical Cutting Duplicator to see which locksmith key cutting machine matches your shop and budget.
Need end mills for CNC work? The 8-piece 4-flute set gives you eight diameters for $13.79; the 5-pack of 1/4" solid carbide end mills costs $78.95. Choose by whether you need variety or repeatable 1/4-inch cutting.
Between an 8-piece end mill set spanning 1/16" to 1/2" and a dedicated 1/8" solid carbide set, the right pick comes down to size flexibility versus consistency for repeated work.
Compare an 8-piece 4-flute end mill set that spans 1/16 to 1/2 inch with a 5-pack of 3/8" solid carbide stub end mills to choose the better fit for your milling jobs.
This head-to-head compares the $78.95 ONLINECARBIDE USA-made 1/4-inch four-flute uncoated end mill set with the $49.99 ZIMI TiALN-coated long end mill set, helping you choose by origin, coating, and price.
Both sets use solid carbide and four flutes, but this head-to-head comes down to diameter, coating, and origin: a 1/4" uncoated USA-made set or a lower-priced 1/8" AlTiN-coated set.
A new 8-piece 4-flute end mill set at $13.79 and a 10-pound used solid carbide lot at $320.00 serve very different shop needs. Here's how to choose based on whether you need ready-to-cut sizes or material for recycling and resharpening.
Choosing between a USA-made 5-pack of uncoated 1/8" end mills and a TiAlN-coated 10-pack at a lower price? Here's how their costs, coatings, and quantities line up so you can pick the right set for your CNC work.
The SGS 12mm corner radius six-flute set and the ZIMI 1/4-inch four-flute long set go head-to-head on geometry, specs, and price to help you choose the right five-pack for your machining work.
Need end mills but torn between a new 1/4" 4-flute carbide five-pack and a 10-pound used carbide lot for resharpening or scrap? This head-to-head compares the two options by price, condition, and best use.
Key Cutting duplicating Machine and Multifunction Vertical Cutting Duplicating Machine go head-to-head: compare price, size, motor, feed, and clamp to pick the right 110V key copier for your locksmith work.
A 5-pack of 3/8" stub-length solid carbide end mills for $147.95 faces a 10-pack of 3/32" AlTiN-coated carbide end mills for $38.90. Here's how to pick the right set for your tooling cutters and abrasives work.
Two solid carbide end mill sets near the same price take different paths: a 5-pack of 1/8" center-cutting cutters and a 10-pack with AlTiN coating. This head-to-head helps you match the set to your job.
A 1/4" long-flute ZIMI pack at $49.99 faces off against a 3/8" stub OnlineCarbide set at $147.95. We break down diameter, reach, and origin to help you pick.
ONLINECARBIDE offers two US-made 5-packs: 1/4-inch uncoated end mills at $78.95 and 3/8-inch TiAlN-coated stub end mills at $147.95. Find out which one matches your cutting jobs.
A 5-piece new SGS 12mm corner radius end mill set at $229 vs a 10 lb used carbide lot at $320-our head-to-head compares price, condition, and what each buy is really for.
Compare a 10-pack of 1/8" solid carbide end mills with a 5-pack of 3/8" stub-length TiAlN-coated cutters by price, pack size, and cutting geometry.
The IGANG and Hunter key cutting machines take different routes to precise duplication: one leans on upgraded positioning and the other on a quieter, more powerful drive. See which locksmith cutter fits your shop.
Two new key duplicating machines, one from IGANG and one from TRELI, sit at different ends of the price spread. Compare steel-clamp auto-feed, quieter DC motor operation, and portability to pick the right 110V key copier.
Compare the IGANG Key Cutting Duplicator at $81.83 with the DC-motor Car Key Copier at $99.00 to choose between precision-focused value and quiet, flexible control.
Between a 21-piece backing-pad kit, 25 roll-lock discs, and a 100-sheet 80-grit pack, these abrasive options span $17.99 to $26.99. Here's how to match one to your project.
Compare four new key cutting duplicating machine listings priced from $99.00 to $116.50. Focus on voltage flexibility, size specs, and the extra features each locksmith tool includes, then pick the listing that matches your bench setup.
Weighing the IGANG key copier against the 368A car key 110V cutter means choosing between a steel-clamp general copier and a storage-drawer model with specific bench dimensions. Decide by key type and workspace.
Two new car-key duplicators sit within a dollar of each other: the TRELI 110V cutter with quieter DC motor and lightweight 18-pound build, and the adjustable-speed model with dual-voltage flexibility. Here is how to decide.
Four key cutting duplicating machines are listed between $99.00 and $112.79, and the real choices are voltage support, motor details, and how much specification data you get. This comparison matches each use case to the best-priced option.
Compare four 4-1/2-inch tooling cutters and abrasives options-from 3M fiber discs to a 21-piece backing pad kit-with listed prices from $17.99 to $35.28 to match the right abrasive to your grinding and sanding work.
A practical look at the 1/8" solid carbide end mills with TiAlN coating and four flutes, sold as a 10-pack for USD 34.59. See who it suits, what stands out from the listed details, and the trade-offs to weigh before adding them to your tooling cart.
A 100-sheet supply of medium-grade 80-grit aluminum oxide sanding sheets at a listed price of USD 22.50. This guide covers who it suits, what stands out, and the trade-offs to consider.
Two 10-packs of TiAlN-coated solid carbide end mills stand at opposite price points and sizes: a $34.59 1/8-inch set for fine cuts and a $379.00 1/2-inch CME set for larger work. Here's how to choose.
Both 70370804 options list two packs of 50 medium-grade 80-grit sanding sheets at USD 22.50. Compare their shared specs and the small difference that can help you pick between the two open-box units.
This five-piece set of 1/4-inch, 4-flute long carbide end mills with TiALN coating is priced at USD 49.99. With HRC 45 capability and a microparticle hard alloy build, it suits machining carbon steel, alloy steel, pre-hardened steel, hardened steel, and cast iron.
A 10-pack of solid carbide, AlTiN-coated 4-flute square end mills at USD 38.90. This guide covers what the set includes, who it suits, and the trade-offs to weigh before you buy.
Compare four abrasive options listed from $19.85 to $35.28: an 80-grit flap disc 10-pack, a 3M fiber disc 5-pack, and two identical 100-sheet sanding sets, to match your grinder or sander and your project.
Four very different cutting tools-a used mixed end-milling lot, a manual leather strap cutter, a solid carbide end mill pack, and a carbide end mill set-show how price and purpose split in tooling cutters and abrasives.
A practical look at four new 5-piece solid carbide end mill sets between $49.99 and $229, including 1/2" TiALN-coated ZIMI sets, a 1/4" option, and a Kyocera SGS 12mm corner radius set.
A practical look at four 4-flute solid carbide end mill packs, from a 1/8" TiAlN set to a 3/8" stub-length USA-made set. Compare listed prices, coatings, and pack counts to match your machining job.
Two new key cutting duplicating machine listings sit just 2 cents apart at around $99. The Hunter-listed unit brings dimensions and a tool drawer; the dual-voltage unit brings 110V/220V flexibility and motor speed control.
Choose between the ZIMI 5-piece 1/4-inch and 1/2-inch long carbide end mills, both TiALN-coated and HRC 45-rated. Compare listed prices, length of cut, and the mill diameter that suits your workholding, depth needs, and tool budget.
The SGS S04607 five-piece set offers 12mm, 1.0R, six-flute, TA-coated carbide end mills at USD 229.00. Here's who it suits and the trade-offs to know.
Finding more guides for you…