Quick verdict
If your immediate need is a functioning mechanical head for blindstitching garment hems, the CONSEW 1099 is the practical choice. It is sold as used rather than for parts or not working and is built for one-needle chainstitch blind hemming. If your goal is to repair, rebuild, or salvage Juki MS-1190 parts, the Juki is the one you'd consider, but only if you're prepared for a non-working machine and the cost of sourcing additional components.
CONSEW 1099 vs Juki MS-1190 at a glance
| Product | Listed price | Price indicator | Condition | Stitch type |
| CONSEW 1099 CS-1H | USD 299.00 | | Used | One-needle chainstitch blindstitch |
| Juki MS-1190 | USD 400.00 | | For parts or not working | Double chainstitch feed-off-the-arm |
Both are sold as head-only machines, so a table and motor are not part of the price.
Where each product wins
The CONSEW 1099 wins on price and working condition. The $101 spread between the two heads leaves more budget for the table and motor you will still need to supply, and it is sold as used rather than as a parts unit. It also wins if your work is blind hemming; skirts, pants bottoms, and similar garment edges are the typical jobs for this one-needle chainstitch machine.
The Juki MS-1190 wins on intended application and parts value. The feed-off-the-arm double chainstitch design suits cylindrical and tubular sewing, but because this unit is damaged and not working, its strongest advantage is as a donor source for Juki MS-1190 parts. That makes it a better bet for a repair technician or a shop with an existing MS-1190 to keep running.
Product notes
CONSEW 1099 CS-1H Blindstitch Head Only Industrial Sewing Machine
The CONSEW 1099 CS-1H is a used, mechanically operated blindstitch head made in Japan, sold at $299. It uses a one-needle chainstitch blindstitch motion, and typical jobs include skirts and pants bottoms, which gives an alteration or garment shop a clear use case. A knee lifter lever is included, a useful addition for production hemming when you need both hands on the fabric. The main limitation is that the machine is head-only: no table, no motor, and no stand are part of this purchase. A shop that does not already own a compatible blindstitch table and clutch motor will need to add those before the head can sew. For someone looking to add a dedicated blind hemming head without paying for a full new machine, this is the more direct path to production.
AS-IS Juki MS-1190 Double Chainstitch Feed-Off-The-Arm Industrial Sewing Machine
The Juki MS-1190 is a single-head, mechanically controlled industrial sewing machine sold as-is at $400 for parts or not working. It uses a double chainstitch feed-off-the-arm configuration, a design commonly associated with stitching sleeves, cuffs, and other cylindrical garments. The catch is condition: this one was damaged during shipment, is not currently operational, and the exact repair needed is not specified. That makes it a reasonable pick if you already have an MS-1190 and need hard-to-find Juki parts, or if you want a repair project with a known Juki model. It is also head-only, so a table and motor are not included, though they can be added for an extra fee. Expect to spend money and time before this unit sews again.
Final choice by use case
- Need a working blindstitch head for hemming skirts, pants, or similar garment edges: choose the CONSEW 1099 CS-1H. It is the lower-priced head and is sold as used rather than non-working.
- Need a Juki MS-1190 donor head or a repair project for feed-off-the-arm double chainstitch work: choose the AS-IS Juki MS-1190. It is the only one of these two that fits that role, but budget for repairs and additional parts.
If you are not prepared to bring a damaged machine back to working order, the CONSEW is the safer buy. If you have the skills and the need for Juki-specific components, the Juki has a clear purpose.
