Choosing between two multiprocess welders under $120 comes down to how much power and process flexibility you need. The FEIFANKE 135A Flux Core MIG Welder sells for $99.99 and uses synergic auto-settings to simplify gasless flux core work. The Reboot 200Amp MIG Welder costs $112 and adds a spool gun, higher 200A output, and 120/240V dual-voltage operation. Both are new machines with a 30% duty cycle and semi-automatic feed, so the real decision is between an easier starter and a more expandable 5-in-1.
Quick verdict
Choose the FEIFANKE if you want the lower-priced, beginner-friendly flux core machine that auto-adjusts wire speed and voltage. Choose the Reboot if you want 200A of output plus an included spool gun for aluminum welding, and you don't mind paying more.
Comparison
| Spec | FEIFANKE 135A | Reboot 200Amp |
|---|---|---|
| Price | $99.99 | $112.00 |
| Max output | 135A | 200Amp |
| Processes | Gasless flux core, Lift TIG (extra torch required), Stick | MIG gas/flux core, Lift TIG, Stick, Spool Gun |
| Feed | Semi-automatic | Semi-automatic |
| Duty cycle | 30% | 30% |
Where each product wins
The FEIFANKE wins on price and ease of setup. Its synergic control lets you pick wire diameter or amperage and automatically sets voltage and wire speed, which helps you get started without fiddling with every knob. It also comes in about $12 lower.
The Reboot wins on capability. It doubles the process count with gas MIG and spool gun support, and its 200A output gives more headroom for heavier material. The dual-voltage input (120V/240V) adds flexibility for different shop wiring.
Product notes
FEIFANKE 135A Flux Core MIG Welder
At $99.99, the FEIFANKE is the more affordable way into flux core welding. Its synergic control lets you set the wire diameter (.030" or .035") or amperage (30-135A), and the machine auto-adjusts voltage and wire speed-useful if you're just learning. You get three processes: gasless flux core MIG, Lift TIG (with an extra torch), and stick welding. The IGBT inverter design and LED display are nice touches at this price. The trade-off is that you're limited to gasless operation unless you switch to TIG or stick, and the 135A max output is best for light to medium DIY projects, automotive panels, and farm repairs rather than heavy plate. If you plan to run gas-shielded MIG or frequently work on thicker steel, you'll outgrow it sooner.
Reboot 200Amp MIG Welder
The Reboot 200Amp MIG Welder costs $112 and is built for someone who wants one machine to cover more ground. It's a 5-in-1 unit supporting MIG with gas, flux core, Lift TIG, stick, and a spool gun-and the spool gun is included, so you can tackle aluminum without buying a separate feeder. The 200A max output provides more power for thicker material than the FEIFANKE's 135A. It runs on 120V or 240V, making it useful across different shops and job sites. The large LED display and semi-automatic feed keep it approachable, though the added process modes mean a slightly steeper learning curve if you're brand new. It's also the higher-priced unit of the pair, so spend the extra $12 only if you know you'll use the spool gun or the extra amperage.
Final choice by use case
For light DIY, home garage repairs, and a budget-friendly first welder, the FEIFANKE 135A is the better call, especially if synergic control appeals to you. For aluminum welding via spool gun, higher 200A output, and dual-voltage flexibility, the Reboot 200Amp justifies its higher price. Both machines share a 30% duty cycle and semi-automatic feed, so the deciding factor is whether you want a simpler start or a more capable multiprocess setup.
