Industrial woodworking projects often start with a sheet-good problem: cut a panel squarely without splintering the face. That is why panel saws and crosscut panel saws sit in so many shops. But this category mixes several tool types under one label. The four used listings here include two vintage 22-inch crosscut panel saws, one complete panel saw, and one 18-inch beam saw blade. The price spread is wide, so the practical decision is not just how much to spend; it is whether you need a stand-alone machine or a consumable blade for a saw you already own.
Quick Take
If you already have a horizontal beam saw, the Freud LSB45007 18-inch blade at $100 is the only blade listing in this set. If you need a complete panel saw, the Safety Speed Cut Manufacturing panel saw at $1,140 is the most complete option. For vintage crosscutting, the Freud England PS022 at $69 and the Garlick & Son Lynx at $79 are the two alternatives.
Listed Price Comparison
The table below sorts the four listings by price and shows where each sits in the overall spread.
| Product | Listed Price | Price Bar | Key Details |
|---|---|---|---|
| Garlick & Son Lynx 22-inch Cross Cut Panel Saw | USD 79.00 | Used, UK, 10 tpi | |
| Freud England PS022 22-inch Cross Cut Panel Saw | USD 69.00 | Used, UK, Vintage Original | |
| Safety Speed Cut Manufacturing Panel Saw 3400 | USD 1,140.00 | Used, US | |
| Freud LSB45007 18-inch Beam Saw Blade | USD 100.00 | Used, Italy, 18 in |
Decision Matrix
Use this quick matrix to narrow down which listing matches your workflow.
| Product | Consider It If | Keep In Mind |
|---|---|---|
| Garlick & Son Lynx 22-inch Cross Cut Panel Saw | You want a Sheffield-made vintage saw with 10 tpi for crosscutting | The used condition means you should expect a secondhand tool |
| Freud England PS022 22-inch Cross Cut Panel Saw | You want a Freud vintage original at the low end of the price spread | It is a used 22-inch crosscut saw, not a powered panel saw |
| Safety Speed Cut Manufacturing Panel Saw 3400 | You need a complete panel saw station and are comfortable with the top listed price | It is a used industrial unit |
| Freud LSB45007 18-inch Beam Saw Blade | You own a horizontal beam saw and need an 18-inch replacement blade | It is a blade only and requires a compatible beam saw |
Product Notes
#### Garlick & Son Lynx 22-inch Cross Cut Panel Saw
This Sheffield England saw from Garlick & Son carries the Lynx brand and a 10 tpi rating, which points to a finer crosscut tooth pattern for panel work. The listing describes it as in very good used condition and includes multiple photos. It is a reasonable pick if you want a vintage UK-made crosscut saw that is more specific than a generic blade purchase. The limitation is that it is still a used saw: the 22-inch length and 10 tpi rating come from the title, but there is no indication of a sharpening service or new condition beyond the description. For a one-off panel crosscut, it is a straightforward option.
#### Freud England PS022 22-inch Cross Cut Panel Saw
This used Freud England saw is a vintage original, meaning the listing presents it as an older Freud piece rather than a reproduction. At the lowest listed price in this comparison, it is the entry point for the group. The 10-point rating in the title aligns with the crosscutting role of the saw. Choose it if you want a Freud-branded vintage crosscut saw and are okay with the used condition. The limitation is that this is a 22-inch crosscut saw, not a full panel saw station; it will not feed or clamp sheet goods for you. If you already have the infrastructure and just need a crosscut saw, this is the low-priced route.
#### Safety Speed Cut Manufacturing Panel Saw 3400
The Safety Speed Cut Manufacturing panel saw is the only complete panel saw in this listing set, and the US-origin industrial machine also carries the highest listed price. This is the option to evaluate when you want a dedicated panel saw rather than a crosscut saw or blade. The used condition and industrial origin make the condition of the unit the main point to weigh before committing. The listing identifies it as a used industrial machine, so your decision will hinge on the unit's physical state. If a panel saw station is the actual need, this listing is the only one in the set that addresses it.
#### Freud LSB45007 18-inch Beam Saw Blade
The Freud LSB45007 is a 450mm/18-inch panel saw blade made for horizontal beam saws. The listing describes it as refurbished, which makes it a different kind of purchase than the vintage saws in this set: it is a consumable component rather than a complete tool. Choose it if you already run a beam saw and need an 18-inch blade; the refurbished label gives you a used option that has been touched up. The limitation is that the blade only works on a beam saw that accepts an 18-inch blade. Without that machine, it cannot cut a panel by itself. This is the one listing here that fills a replacement part role.
Final Recommendation by Use Case
For a full panel saw station, the Safety Speed Cut Manufacturing Panel Saw 3400 is the only complete machine in the comparison, and its top-of-range listed price reflects that scope. If you just need to refresh a beam saw, the Freud LSB45007 blade is the only consumable listed. Between the two vintage crosscut saws, the Freud England PS022 offers the lowest listed price in the set, while the Garlick & Son Lynx provides a Sheffield-made alternative with a 10 tpi tooth count at a slightly higher listed price. Match the tool to the task, and you will spend in line with what the shop actually does.
