When shopping for machine tool parts coolants supplies for a CNC lathe or milling machine, the first question is often whether one mist sprayer is enough or whether a full coolant pump package makes more sense. These two products sit at opposite ends of the listed price range: the Mist Coolant Lubrication Spray System Unit is listed at USD 8.77, while the Coolant Cooling Spray Pump Mist Sprayer System is listed at USD 85.50. Both are described as new, but they describe different levels of kit.
Quick verdict
If you want a single, compact spray unit to start mist cooling on a CNC lathe or milling machine, the Mist Coolant Lubrication Spray System is the lower-priced route. If you want a more complete package with a tank and flow-control components, the Coolant Cooling Spray Pump Mist Sprayer System is the larger bundle, and it clearly tells you to supply your own air compressor.
Comparison at a glance
| Product | Listed price | Price bar | What the package describes |
|---|---|---|---|
| Mist Coolant Lubrication Spray System Unit for CNC Lathe & Milling Machine | USD 8.77 | One spray system unit; adjustable airflow and spray volume; combines cooling, lubricating, and chip blowing | |
| Coolant Cooling Spray Pump Mist Sprayer System for CNC Lathe Milling Machine New | USD 85.50 | Package includes 2 sprayers + solenoid valve + filter + 1 tank; users supply their own air compressor |
Where the Mist Coolant Lubrication Spray System wins
- Lower listed price.
- Described as an all-in-one spray tool for cooling, lubrication, and chip blowing.
- Adjustable airflow and spray volume, with the description saying it can save 60-80% of lubricant.
- Includes a blue tube about 30cm and a transparent tube about 1.5m.
Where the Coolant Cooling Spray Pump Mist Sprayer System wins
- Bundled contents include a tank, solenoid valve, filter, and second sprayer.
- Description highlights durable material and compact design with long service life.
- Better match for a shop that wants more of the coolant path handled in one package.
Product notes
Mist Coolant Lubrication Spray System Unit for CNC Lathe & Milling Machine
At the lower listed price, this is a simple entry into mist lubrication. The description covers adjustable airflow and spray volume, and says the unit can save 60-80% of lubricant while handling cooling, lubrication, and metal-chip blowing from one tool. The package includes a blue tube of about 30cm and a transparent tube of about 1.5m. The trade-off is that the contents stop at that one spray system, so shoppers who want a tank and valve package would look at the other product. For someone adding a compact sprayer to a CNC machine, this unit keeps the purchase minimal.
Coolant Cooling Spray Pump Mist Sprayer System for CNC Lathe Milling Machine New
At the higher listed price, this product describes a more complete setup: two sprayers, a solenoid valve, a filter, and a tank. The product information also points to durable material and a compact design with long service life. It adds an important setup condition: you need your own air compressor, with air pressure in the 2KG-8kg range, connected through the air inlet marked IN. If you already have an air compressor, this kit is closer to a ready-to-integrate cooling package. The higher price buys more listed components, but not an air source.
Final choice by use case
If your main goal is to add a single mist coolant sprayer to a CNC lathe or milling machine at the lower listed price, the Mist Coolant Lubrication Spray System is the unit that matches that use. If you want the bundled kit with more coolant-path components and your shop already has an air compressor, the Coolant Cooling Spray Pump Mist Sprayer System is the more complete option. The two products target different setup ambitions: one is a basic spray unit, the other is a multi-part coolant kit.
