Choosing a MIG welder usually comes down to a trade-off: do you want a multi-process machine that can handle aluminum MIG, or do you want something compact and simple for quick repairs? In the welding and soldering equipment space, these four machines show how far that choice can go. Two are 6-in-1 units with aluminum MIG modes, and two are lighter, more portable MIG models. The listed prices run from $69.99 to $172.99, but the bigger differences show up in process support, voltage options, and portability.
Quick take
For a single machine that covers more processes, the AWT and HIZONE 6-in-1 models are the main candidates. If you want a carryable unit for lighter MIG tasks, the HIZONE 135A and HZXVOGEN 145A are the more portable choices. The right pick depends on whether you need multi-process flexibility or a lighter task-specific welder.
Listed-price comparison
| Product | Listed Price | Price Bar |
|---|---|---|
| HIZONE 6-in-1 Aluminum MIG Welder with LCD Display | USD 140.99 | |
| AWT 6-in-1 Aluminum MIG Welder 110/220V | USD 172.99 | |
| HIZONE 135A MIG Welder 3-in-1 | USD 89.99 | |
| HZXVOGEN 145A Mini MIG Welder | USD 69.99 |
Decision matrix
| Model | Process Focus | Standout Detail | Consider It If |
|---|---|---|---|
| HIZONE 6-in-1 Aluminum MIG Welder with LCD Display | 6-in-1 MIG process set | Large LCD screen, included 10 ft MIG gun, electrode holder, ground clamp | You want a multi-process unit with a clear display |
| AWT 6-in-1 Aluminum MIG Welder 110/220V | 6-in-1 MIG process set | Synergic control | You want a 6-in-1 with automatic parameter adjustment |
| HIZONE 135A MIG Welder 3-in-1 | Gasless MIG, Stick, Lift TIG (extra torch) | 10.7 lb body with shoulder strap and handles | You need a portable 110V unit for maintenance and repair |
| HZXVOGEN 145A Mini MIG Welder | Gasless flux-core MIG | 9 lb body, simple gasless setup | You want an entry-level flux-core machine for thin plate work |
Product notes
HIZONE 6-in-1 Aluminum MIG Welder with LCD Display
This is the multi-process unit to consider when you want aluminum MIG without a spool gun or Teflon tube. The included 10 ft MIG gun, 10 ft electrode holder, 10 ft ground clamp, gas hose, and 120V-240V adapter cover a lot of setup needs. The large LCD screen makes settings easier to read than a basic dial. The trade-off is weight: at 24.4 lb, it's not a machine you'll want to carry across a job site.
AWT 6-in-1 Aluminum MIG Welder 110/220V
If dual-voltage flexibility matters, this 6-in-1 unit lists 110/220V support and uses synergic control to adjust welding parameters based on wire diameter, material, and gas selection. That combination makes it a good partner for home DIY, farm work, and construction sites where outlet availability changes. It also supports aluminum MIG without a spool gun or Teflon tube. The trade-off is the highest listed price in this comparison.
HIZONE 135A MIG Welder 3-in-1
This 3-in-1 machine is built around gasless MIG, Stick, and Lift TIG, and its 10.7 lb body with shoulder strap and handles makes it easy to take to outdoor repairs, farming equipment, and road maintenance. The 110V design keeps it focused on portable, light-duty work. The limitation: Lift TIG requires an extra torch, so that mode is available only when you add the accessory.
HZXVOGEN 145A Mini MIG Welder
At 9 lb, this is the lightest machine in the group, and the included conversion wire for 110V/220V dual voltage makes it easy to set up in a garage or mobile kit. The gasless flux-core format is intentionally simple, and the listed 145A maximum output points to plate up to 1-5mm thick. That makes it a sensible entry-level option. If you need gas MIG, stick, or TIG modes, this flux-core machine isn't the one.
Final recommendation by use case
- If you want one machine for several processes, including MIG and stick modes: choose the AWT 6-in-1 if you want dual-voltage flexibility and synergic control; choose the HIZONE 6-in-1 if you want a large LCD and the included accessory kit.
- If you want a portable gasless flux-core machine: the HZXVOGEN 145A is the lightest and lowest listed price; the HIZONE 135A is a 3-in-1 alternative with Stick and Lift TIG modes.
- If you are learning entry-level flux-core welding: the HZXVOGEN 145A is the most direct fit, with its 9 lb body, automatic voltage matching, and gasless flux-core design.
