If your workshop handles both metal repairs and electronic joints, the shopping decision isn't just about price-it's about process. The four products below illustrate the range of welding soldering equipment, from a five-mode welder at $169.99 down to a lead-free solder wire at $30.00. The correct pick depends on whether you're joining thick steel, thin sheet, or small components.
Quick take
For structural work, you need a welding machine. The ABX MAG160 offers the broadest process coverage here with five modes. The AZZUNO 135A and FEIFANKE 135A are both 3-in-1 MIG welders, priced at $117.82 and $99.99 respectively. For electronics or fine joints, the Almit SR-37 solder is the only non-welder in the group and costs $30.00.
Listed price comparison
| Product | Listed Price | Price Bar |
|---|---|---|
| 5-in-1 ABX MAG160 Welder: MMA/MIG/FLUX-CORED/TIG/Spot Profor Home/Industry | $169.99 | |
| AZZUNO 135A MIG Welder 110V 3 in1 Flux MIG/Lift TIG/Stick IGBT Welding Machine | $117.82 | |
| 135A Flux Core MIG Welder 110V Gasless Flux Core/Lift TIG/Stick Portable, IGBT | $99.99 | |
| Almit SR-37-LFM48M-0.5 Pb Free Resin Flux Cored Solder 500g | $30.00 |
Decision matrix
| Product | Good match for | Consider if | Keep in mind |
|---|---|---|---|
| ABX MAG160 | Multi-process welding with five modes | You want MMA, MIG, flux-cored, TIG, and spot in one unit | Highest price in the group at $169.99; 22.5-pound weight |
| AZZUNO 135A | 110V 3-in-1 MIG/Lift TIG/Stick | You want synergic control and a lighter 10.8-pound unit | Lift TIG torch is not included |
| FEIFANKE 135A | Gasless flux core MIG/Lift TIG/Stick | You want a $99.99 MIG with LED display and synergic control | Lift TIG needs an extra torch; listed duty cycle is 30% |
| Almit SR-37 | Lead-free resin flux cored soldering | Your job calls for solder wire, not a welding machine | Not a substitute for MIG, TIG, or stick welding |
Product notes
5-in-1 ABX MAG160 Welder: MMA/MIG/FLUX-CORED/TIG/Spot Profor Home/Industry
At $169.99, the ABX MAG160 is the highest-priced product in this comparison. It offers five welding modes-MMA, MIG, flux-cored, TIG, and spot-plus a 160A maximum output and dual voltage 110/220V input. The IGBT technology and 22.5-pound weight point toward a heavier machine. If you need one unit that can handle several processes without buying separate gear, this is the one to consider. The main compromise is the price: it costs $139.99 more than the $30 solder wire, and its weight makes it less portable than the 10.8-pound AZZUNO and the 13.51-pound FEIFANKE.
Almit SR-37-LFM48M-0.5 Pb Free Resin Flux Cored Solder 500g
At $30.00, the Almit SR-37 is the lowest-priced item in this comparison and the only solder wire rather than a welding machine. It's a lead-free resin flux cored solder, made in Japan, and the product carries a California Proposition 65 warning. This makes it a practical addition to a soldering station for electronic components or fine metal joints. Choose it if your task is precision soldering instead of structural welding. The limitation is scope: it can't perform MIG, TIG, or stick welding, so it's not a substitute for the welders in this group. The 500g spool size gives you a large supply for repeated jobs.
AZZUNO 135A MIG Welder 110V 3 in1 Flux MIG/Lift TIG/Stick IGBT Welding Machine
The AZZUNO 135A is a 3-in-1 MIG welder that runs on 110V and weighs 10.8 pounds, making it a lighter option than the ABX. Its synergic control lets the machine choose voltage, amperage, and wire feed speed, which is helpful if you're less familiar with setting up a weld. The listed price is $117.82. It's designed for flux MIG, lift TIG, and stick welding, though the lift TIG torch isn't included. That means you'll need to add a torch for lift TIG jobs. If your work is mostly flux-core MIG on thin to medium steel and you don't need five modes, this is a practical middle-ground pick.
135A Flux Core MIG Welder 110V Gasless Flux Core/Lift TIG/Stick Portable, IGBT
The FEIFANKE 135A is the lowest-priced MIG welder in this comparison at $99.99. It's a gasless flux core MIG welder with lift TIG and stick modes. The LED display and synergic control aim to simplify setup for beginners; the controls adjust wire diameter or amperage from 30 to 135A. It weighs 13.51 pounds and carries a 30% duty cycle, so it's a portable machine but not a continuous-production unit. As with the AZZUNO, lift TIG requires an extra torch that isn't included. If you want a lower-priced gasless welder for hobby repairs and light steel work, this is the one to weigh against the AZZUNO.
Final recommendation by use case
Pick the ABX MAG160 if you want five welding modes and dual voltage in one machine and can accept the $169.99 price. Choose the AZZUNO 135A if you prefer a 110V 3-in-1 MIG with synergic control at $117.82 and don't need the extra ABX modes. Select the FEIFANKE 135A if a $99.99 gasless MIG with LED display and lift TIG is enough for your garage and you don't mind adding a torch. Or buy the Almit SR-37 solder if your real project is soldering rather than welding. The final call comes down to the metal you're joining and whether you need a machine or a consumable.
