Choosing a shop press for a garage or workshop usually comes down to capacity versus cost. For metal forming, you need enough force to press out bearings, bend brackets, or stamp parts without paying for more machine than you will use. The 20-ton floor press is listed at USD 169.99, while the 6/12/20-ton benchtop H-frame press is listed at USD 90.29. That $79.70 gap frames the decision: do you need the heavier capacity, or is the lower-priced press enough? Both are GARVEE H-frame presses, so the core shape is similar; the real separation is rated capacity and the hardware included. A press that is too small can stall on a stuck bearing, so it helps to think about the heaviest job you actually do.
Quick Verdict
Buy the 20 Ton H-Frame Floor Press if your work is heavier and more frequent. Buy the 6/12/20 Ton H-Frame Press if you want a lower entry price and plan to tackle lighter jobs. Focus on the heaviest job you expect to do; that will point you to the right side of the comparison.
Price and Feature Comparison
| Feature | 20 Ton H-Frame Floor Press | 6/12/20 Ton H-Frame Press |
|---|---|---|
| Price | USD 169.99 | USD 90.29 |
| Rated load | 20 Ton | 6 Ton (6/12/20 Ton model) |
| Included pressing aid | Press plates | Adjustable worktable |
| Warranty | 3 Year | 5 Year |
| Color | Blue | Black |
Where Each Product Wins
Where the 20 Ton wins: For heavier pressing and jobs that need more headroom, the '20 Ton' in its name says it all. Where the 6/12/20 Ton wins: For lighter shop duty and a lower outlay, the '6/12/20 Ton' model keeps the entry cost down.
Product Notes
20 Ton Hydraulic Press with Press Plates
The 20 Ton model is the more capable choice for shops that regularly press larger parts. The included press plates give you a ready-made flat surface for bearing removal, bending, and stamping, and the carbon steel H-frame is described as stable and adjustable, with a relief valve and precision springs. The adjustable working table helps position the workpiece, and the removable levers make setup simpler. This press carries a higher price tag than the benchtop model, so it makes sense mainly if the extra capacity gets used. If most of your work is light assembly or occasional bushing pressing, this amount of force may be more than you need.
6/12/20 Ton Hydraulic Press Benchtop Shop Press
The 6/12/20 Ton model is the lower-cost entry into an H-frame press. It is described as delivering stable power output with no jitter, and the freely adjustable worktable helps when you switch between workpieces of different heights. This listing shows the 6 Ton version, so it will not deliver the same peak force as the 20 Ton press for heavy bearing or thick-metal jobs. The black finish gives it a different look in the shop, and the lower price leaves room in the budget for other tooling. It is also a good pick when you are just starting a home workshop and want to keep the initial equipment cost down.
Final Choice by Use Case
- Heavy workshop pressing: Go with the 20 Ton H-Frame Floor Press. The extra force makes it the one to pick when you press large bearings or bend thick parts regularly.
- Light to medium work: Choose the 6/12/20 Ton H-Frame Press. It gives you an H-frame press at a lower outlay.
- Occasional weekend use: The 6/12/20 Ton model is likely enough for most small pressing jobs. If you expect daily heavy use, the 20 Ton model gives you more headroom.
