Choosing between a torch-style CNC plasma cutter and a full-size automated cutting table is a big fork in the road when you're outfitting a shop for laser plasma waterjet cutting work. The two systems here sit at opposite ends of that road: the Eastwood Versa-Cut 40 is listed at $999.99, while the Koike Aronson Cutter-II-510 comes in at $11,442.50. That price gap is really a difference in scope: one is a flexible torch-and-power-supply package, and the other is a complete cutting table system. Before you settle, ask yourself how much work will land on the table and how much automation you want to manage yourself.
Quick verdict
The Eastwood is the choice if you want to get into CNC plasma without buying a large dedicated table. It runs on 120V or 240V and can cut steel, stainless, or aluminum from 24-gauge to 3/8-inch. The Koike Aronson is the choice if your work is big plate and you need the cutting envelope of a full-size table. For most shops just adding plasma capability, the Eastwood is the more straightforward starting point; for production environments already pushing big sheets, the Koike Aronson's table wins.
At a glance
| Product | Listed Price | Price Bar | Good For |
|---|---|---|---|
| Eastwood Versa-Cut 40 CNC Plasma Cutter With Machine Torch | USD 999.99 | Shops adding CNC plasma to a 4x4-style table | |
| Koike Aronson CNC Plasma Cutter-II-510, Advanced Cutting Systems, 5' x 10' Table | USD 11,442.50 | Production shops cutting large plate |
Where each product wins
Eastwood Versa-Cut 40 wins for CNC-friendly flexibility. The blowback pilot arc reduces interference when wired into CNC controls, and the rear 12-pin plug is ready for dedicated table hookups. That combination makes it a clean fit for a CNC table build.
Koike Aronson Cutter-II-510 wins for production table capacity. This is a full automated cutting system with a large-format table, designed around precision plasma work for shops that handle sheet and plate in bigger sizes. The payoff is less time breaking down stock and more time running actual parts.
Product notes
Eastwood Versa-Cut 40 CNC Plasma Cutter With Machine Torch
The Versa-Cut 40 CNC earns its place with a blowback pilot arc that minimizes interference when you hardwire it into CNC controls. The rear-mounted 12-pin plug is there for dedicated table hookups, and dual-voltage input lets you run from a standard 120V outlet or step up to 240V when available. An included machine torch means you don't need to source a torch separately. The trade-off? The cutting range tops out at 3/8-inch steel, so thicker plate is out of reach for this unit. It's also the torch-and-power-source side of a system, so the table and motion control are separate pieces of the puzzle. If you're matching it to an existing table, the 12-pin interface gives you a clear wiring path.
Koike Aronson CNC Plasma Cutter-II-510, Advanced Cutting Systems, 5' x 10' Table
What makes this system compelling is the package: a Koike Aronson Cutter-II-510 with a 5' x 10' table and Advanced Cutting Systems engineering aimed at precision plasma work. You can set up full sheets on the table and let the CNC move through the cuts. The catch is that this is listed as used equipment, so it carries the realities of a pre-owned production machine. The table, motion components, and torch deserve close attention when you're deciding, especially if your shop depends on uptime. That large table gives you a different class of work envelope than a torch-only setup, and for a shop with the floor space, it changes how you batch jobs.
Final choice by use case
If you're building a CNC plasma setup around a smaller table or want to start with a straightforward torch package, the Eastwood Versa-Cut 40 is the pragmatic pick. If you're operating a shop where large plate is the norm and you want a dedicated large-format table, the Koike Aronson Cutter-II-510 is the system that matches the work.
