Buying a magnetic drill press comes down to a familiar trade-off: do you need a lighter, easier-to-position tool for smaller holes, or a heavier-duty machine that can hold tight and push a bigger cutter through thick steel? These two options sit at different ends of that decision.
Quick verdict
If you want the lower listed price and easier handling for core drilling up to 1.4 in / 35 mm, the Industrial Drill Press Magnetic Base 1300W from GEARZAAR is the pick. If your work involves boring up to 2-inch holes in structural steel and you want 2922lbf of magnetic holding force, the 1850W Magnetic Drill Press Mag Drill is the one to choose.
Price and specs at a glance
| Product | Listed price | Key specs | Price bar |
|---|---|---|---|
| Industrial Drill Press Magnetic Base 1300W (GEARZAAR) | USD 220.89 | 1300W, fixed 650 RPM, 1.4 in max core drilling diameter, 1.8 in depth, 22.9 lb net weight | |
| Magnetic Drill Press Mag Drill Press 1850W | USD 377.99 | 1850W, 810 RPM, 2 in boring diameter, 2922lbf magnetic force |
Where the GEARZAAR 1300W wins
- Lower listed price: $220.89 vs $377.99.
- Portable handling: lightweight design and detachable handle make it easier to move around tight spaces.
- Practical features: lever-based operation and a cooling device for reduced fatigue during use.
Where the 1850W mag drill wins
- More power and speed: 1850W motor at 810 RPM vs 1300W fixed 650 RPM.
- Bigger hole capacity: up to 2 in boring diameter vs 1.4 in.
- Stronger magnetic hold: 2922lbf (13000N) for horizontal, vertical, or overhead drilling.
Product notes
Industrial Drill Press Magnetic Base 1300W (GEARZAAR)
At $220.89, this is the less expensive way into a magnetic drill press. Its 1300W motor spins at a fixed 650 RPM, and its maximum core drilling diameter is 1.4 in / 35 mm with a depth of 1.8 in / 45 mm. That's enough for many metal-fabrication tasks, and the lightweight, detachable-handle design makes it easier to carry between work sites. The lever-based operation and cooling device are practical touches. The trade-off is the smaller hole range and the single speed; you don't get the speed adjustment or the 2-inch capacity of the more powerful model. Choose it when portability and the lower price matter more than maximum cutting size.
Magnetic Drill Press Mag Drill Press 1850W
The 1850W model asks $377.99, but it brings a noticeable step up in capability. It turns at a maximum 810 RPM and can bore holes up to 2 inches in diameter, while the 2922lbf electromagnetic suction is designed to hold the tool firmly to ferrous surfaces-important for horizontal, vertical, or overhead drilling. It also has an intuitive speed adjustment knob for matching RPM to material and cutter size, which the 1300W GEARZAAR does not offer. The limitation is price: it's $157.10 more than the 1300W model, and if your jobs rarely exceed 1.4-inch holes, the extra power may not earn its place in a smaller shop.
Final choice by use case
- Tight spaces and lighter metal: the GEARZAAR 1300W at $220.89.
- Structural steel and 2-inch holes: the 1850W mag drill at $377.99.
