The Decision Problem
When you shop lathes mills drilling machines, the first thing to untangle is whether you need a machine that spins the workpiece, a table that moves it, or a lamp to see it. The four options in this comparison cover all three. The pricing spread is wide, from a compact cross-slide worktable to a full-size 1100W bench lathe, so the right pick depends on what you already own and what job needs to happen on your bench. Once you answer that, the price comparison below narrows the field.
Quick Take
If you want to turn round stock, the Mini Lathe Machine Motorized Metal Working Lathe Machine is the least expensive entry into turning, but it is marketed as a hobby machine. If you need bigger swing and center distance, the TECHTONGDA bench lathe is the more capable of the two. If you already have a drill press or mini mill, the Mini Milling Machine Worktable adds controlled X/Y travel. And if the machine is in place but the work area is dim, the Dazor industrial lamp brings period-correct lighting. The Dazor is an accessory, not a machine, and the worktable only becomes useful when paired with an existing spindle.
Listed Price Comparison
| Product | Price | Relative Price |
|---|---|---|
| Mini Milling Machine Worktable 12.2\" Compound Drilling Cross Slide Table | USD 53.21 | |
| Vintage 1950s Dazor Model 1100 Industrial Lamp Milling Machine Lathe Drill Press | USD 75.00 | |
| Mini Lathe Machine Motorized Metal Working Lathe Machine 20000RPM for DIY Hobby | USD 155.69 | |
| TECHTONGDA® Inch Precision Metal Wood Bench Lathe 8\"*39\" 1100W DIY Lathe 110V | USD 2,226.00 |
Decision Matrix
| If you need... | Choose this | Why |
|---|---|---|
| A complete lathe for hobby turning of wood, plastic, aluminum, or copper | Mini Lathe Machine 20000RPM | 12V DC powered, 24W, high listed 20,000 RPM motor |
| A bench lathe with more swing and longer center distance | TECHTONGDA 8\"*39\" Bench Lathe | 8.27\" swing, 39.37\" center distance, 1100W |
| A precision movement table for drilling or light milling | Mini Milling Machine Worktable 12.2\" | 200mm/8\" X travel, 50mm/2\" Y travel, 3 T-slots |
| Machine-shop task lighting | Dazor Model 1100 Industrial Lamp | 1950s, metal, gray, black cord, US origin |
Product Notes
Mini Lathe Machine Motorized Metal Working Lathe Machine 20000RPM for DIY Hobby
This miniature lathe is designed with hobby use in mind. It runs on a 12V DC 2A transformer, draws 24W, and is built from aluminum alloy, so it suits a tabletop setup. The listed 20,000 RPM motor speed looks aggressive, but the operating guidance asks for a smaller feed rate when working harder materials. A reason to choose it: it is the only complete motorized lathe in the group in the low three-figure price territory. A limitation: the same unit is specified for wood, plastic, aluminum, copper, and similar soft metal, not alloy. Keep expectations for precision modest.
TECHTONGDA Inch Precision Metal Wood Bench Lathe 8\"*39\" 1100W DIY Lathe 110V
The TECHTONGDA is the largest product here, with an 8.27\" swing over bed and 39.37\" center distance. The 4.92\" maximum chuck clamping diameter, plus 1100W power and semi-automatic control, make it a more substantial workspace install. It also carries an inch screw thread standard and variable spindle speed up to 2500 RPM. Choose it when longer workpieces or heavier cuts are the goal. The limitation is the scale: this is a heavy bench lathe with a price that matches its capability, and it runs on 110V AC, so it needs floor space and a suitable power supply.
Vintage 1950s Dazor Model 1100 Industrial Lamp Milling Machine Lathe Drill Press
This Dazor lamp is not a milling or turning machine, despite the machine names in the product title. It is a used 1950s industrial lamp made of metal, finished in gray, with a black cord and a United States origin. A good reason to select it: if your lathe, mill, or drill press is already set up, this adds directional task lighting with a vintage machine-shop look. A limitation: it is a lamp only, so it cannot perform any cutting, turning, or drilling operation. Treat it as a lighting accessory rather than as a substitute for machine tools.
Mini Milling Machine Worktable 12.2\" Compound Drilling Cross Slide Table
The worktable is an accessory that gives a drill press or small mill more controlled movement. It includes three T-slots, 200mm / 8 inches of X-axis travel, and 50mm / 2 inches of Y-axis travel, with hand wheels on both sides and laser-etched metric scales. The table is made of aluminum alloy and the base is cast iron with a green anti-rust coating. This is the best pick if you want to add precision positioning without buying another spindle. The limitation is that it has no motor, chuck, or spindle, so it must be used with an existing machine to be useful.
Final Recommendation by Use Case
If you need a complete lathe for soft materials and hobby-scale work, start with the Mini Lathe Machine and respect the soft-metal limitation. For longer workpieces and more power, the TECHTONGDA bench lathe is the stronger choice. If you already have a drill press or small mill, the Mini Milling Machine Worktable adds precision at the lowest listed cost in this set. If what you actually need is light and character, the Dazor industrial lamp is the non-machine solution. If your budget or bench space is tight, the Mini Lathe and the worktable are the least demanding ways into this list; if you expect to grow into heavier projects, the TECHTONGDA opens that path.
