Which press brake attachment belongs on your hydraulic shop press depends less on bend angle and more on how thick a sheet you will actually bend. The lower-priced unit and the Eastwood unit both serve the same basic bending job, but they are built for different workloads. Their prices are about $193 apart, which is a strong signal that they serve different shops. If your metal forming work is mostly thin sheet, one of them will save you money; if you need heavier bends, the other is the one to own.
Quick Verdict
Choose the lower-priced attachment when you bend thin sheet metal occasionally and keeping the outlay low matters more than maximum thickness. It will handle a meaningful share of hobby and light fabrication jobs. Choose the Eastwood attachment when you routinely bend mild steel or aluminum at heavier thicknesses and want a unit with more material capacity. That extra thickness range is what makes it worth the higher price.
At a Glance
| Feature | Lower-priced attachment | Eastwood attachment |
|---|---|---|
| Price | $107.34 | $299.99 |
| Relative price | ||
| Bend angle | 90° | Up to 90° |
| Max bending width | 12 in | 12 in |
| Max material thickness | 3/16 in | 3/8 in |
| Overall dimensions | 14.5 x 7.5 x 9.25 in | 14.5 x 7.5 x 9.25 in |
| Press compatibility | Hydraulic shop presses | Standard 12/20 ton hydraulic shop presses |
Where Each Product Wins
Where the lower-priced unit wins: Upfront cost. It performs the same basic bending job as the Eastwood for a much smaller outlay, so it is the easy choice if your work is light and occasional.
Where the Eastwood wins: Heavier jobs. It is built to handle material well beyond the capacity of the lower-priced unit, which makes it the stronger choice when bends need to be structural.
Product Notes
Press Brake Attachment Press Brake Attachment for Hydraulic Shop Presses
This red attachment is made from 45# steel with a plastic-sprayed and blackened finish, which points to a durable surface for repeated shop use. It supports a 90° bend angle and a 12-inch maximum bending length, so it can process metal sheets into various shapes for common light-duty jobs. The maximum bending thickness is 3/16 inch, meaning it is best suited to thin material rather than heavy structural work. That thickness ceiling is the main limitation to keep in mind before buying. For a shop that occasionally needs to form metal and wants to keep the tool investment modest, this attachment is a practical entry point.
Eastwood Press Brake Attachment For Standard 12/20 Ton Hydraulic Shop Presses
The Eastwood attachment is designed for standard 12 or 20 ton hydraulic shop presses and can bend mild steel and aluminum up to 3/8 inch thick. With a 41 mm upper die mounting cup, it offers a useful fit detail for the die mounting setup on many shop presses. Its heavier material capacity makes it well suited to forming floor reinforcement channels, sections of corrugated pickup bed floors, brackets, and similar structural shapes. The tradeoff is the higher price relative to the lower-priced unit, so this attachment makes sense when the extra thickness range is something you will actually use. For thinner, occasional work, it is more capacity than the job needs.
Final Choice by Use Case
If you bend heavier metal or need structural shapes, the Eastwood attachment is the one to choose. Its larger material capacity makes it the stronger candidate for heavier bends, especially if your projects include channels, ribs, or brackets.
If your metal forming is mostly thin sheet and you want to minimize spend, the lower-priced attachment is the better fit. It provides the core bending function at a much lower outlay, which is enough for occasional projects and keeps your tool budget intact.
