When you're equipping a lathe or milling machine, the first decision is whether you need a complete machine or an accessory that adds capability to one you already own. The four listings here make that choice concrete: listed prices run from $39.99 to $3,799.00, with a coolant mister at the low end and a benchtop milling machine at the high end. In between, a dividing head and a power feed target specific milling tasks. Your job is to weigh the scope of the tool against the price tag.
Quick take
If you need a complete milling machine, the PM-25MV is the listing built for that job. If you already have a mill or lathe, the remaining three options solve narrower problems: keeping tools cool, indexing workpieces, and automating feed movement.
Listed price comparison
| Product | Listed Price | Price Bar |
|---|---|---|
| Coolant Mister for Milling Machine, Mist Coolant System with Magnet Base, CNC | $39.99 | |
| Indexing Dividing Head BS-1 6" 3 Jaw Chuck & Tailstock for CNC Milling Machine | $303.99 | |
| 1PC ALSGS 110V/220V Power Feed for Horizontal Milling Machine X Y Axis ALB-310SX | $311.00 | |
| PM-25MV Precision Benchtop Milling Machine w/ 3-Axis DRO! STAND | $3,799.00 |
Decision matrix
- Need a complete benchtop mill: PM-25MV Precision Benchtop Milling Machine w/ 3-Axis DRO! STAND
- Need to add mist coolant to an existing lathe or mill: Coolant Mister for Milling Machine, Mist Coolant System with Magnet Base, CNC
- Need to create indexed angles or divisions: Indexing Dividing Head BS-1 6" 3 Jaw Chuck & Tailstock for CNC Milling Machine
- Need automatic feed movement: 1PC ALSGS 110V/220V Power Feed for Horizontal Milling Machine X Y Axis ALB-310SX
Product notes
Coolant Mister for Milling Machine, Mist Coolant System with Magnet Base, CNC
If you want a low-cost way to improve cooling on a lathe, mill, or CNC machining center, this kit brings the basics: a sprayer, a hose, a magnet base, and a screw. The aluminum-alloy and copper construction and the design that lets you regulate the sprayer and coolant volume make it useful for cooling specific cuts. It is the lowest listed price in this group, which makes it an easy entry point for mist cooling. The limitation is that it is only an accessory, so it requires an existing machine, and the compact size means you need to think about where the magnet base will attach.
Indexing Dividing Head BS-1 6" 3 Jaw Chuck & Tailstock for CNC Milling Machine
For precise angular work, this semi-universal dividing head combines a 6-inch 3-jaw chuck and a tailstock, with a spindle speed of 2,500 RPM and a 1:40 reduction ratio. The headstock tilts from horizontal to vertical at a 90-degree angle, and the laser-engraved scales plus 24 quick-dividing holes support repeatable indexing. It is a specialized addition for operations that need repeated angular divisions. The limitation is the size and weight: at 77 lbs with headstock dimensions around 4.4 x 7.9 x 11.8 inches, it demands a stable setup and a mill that can handle the dividing head and tailstock arrangement.
PM-25MV Precision Benchtop Milling Machine w/ 3-Axis DRO! STAND
This is the only complete machine in the group, and it includes a 3-axis DRO and a stand. The manual-control mill has a 1 hp spindle, a max spindle speed of 2,500 RPM, and functions listed as drilling and milling. It uses 0.001-inch dial readings on the X and Y axis and thrust bearings in the leadscrews, which point to a setup built for more precise benchtop work. The limitation is that it is the highest listed price in the group, and you need enough space for a stand-mounted benchtop machine rather than a small add-on.
1PC ALSGS 110V/220V Power Feed for Horizontal Milling Machine X Y Axis ALB-310SX
If you want to reduce manual cranking on a horizontal mill, this power feed provides automatic, stepless speed regulation for X/Y axis travel. The 110V/220V voltage range gives it flexibility for different shop wiring, and the ALB-310SX model name ties it specifically to horizontal milling machines. The limitation is that it is a feed unit only, so you need a compatible horizontal milling machine to attach it to; it will not turn a manual mill into a CNC machine. The decision between this and the dividing head comes down to whether feeding automation or indexing is more important for your next jobs.
Final recommendation by use case
- For a full machine that drills and mills: PM-25MV Precision Benchtop Milling Machine
- For adding mist coolant to a lathe or mill: Coolant Mister for Milling Machine
- For indexing and dividing work: Indexing Dividing Head BS-1
- For automatic stepless feed on a horizontal mill: ALSGS Power Feed ALB-310SX
