Two Everlast plasma cutters, the PowerPlasma 82i and the PowerPlasma 62i, present a familiar choice in the plasma cutting aisle: more cutting current or a lower price. Both come from the same Everlast brand, both are listed as new, and both are built in the United States. They share a single-phase power design and a CNC option, and neither is sold as a custom bundle. From there, the decision splits: the 82i is listed at $1,269, while the 62i is listed at $999. That $270 gap is the heart of the decision.
Quick verdict: If heavy cutting is on your schedule, choose the PowerPlasma 82i; if you want to keep the overall cost down and the lower output covers your work, go with the PowerPlasma 62i.
| Model | Listed Price | Output Current | Power Input | Noteworthy Detail |
|---|---|---|---|---|
| PowerPlasma 82i (with IPT-80 torch) | $1,269 | 80 amps | 1-phase | Digital controlled circuitry, digital air pressure gauge |
| PowerPlasma 62i (with IPT-60 torch) | $999 | 60 amps | 220/240V 1-phase | All-digital inverter platform, 33-amp input amperage |
Where each wins
The PowerPlasma 82i takes the edge for heavier cutting and built-in monitoring. The higher amp rating gives it more headroom for thicker plate, and the added monitoring ability takes the guesswork out of air supply.
The PowerPlasma 62i is the leaner choice when cost matters most. It asks for less upfront money and uses a smaller input draw, which can be easier on a shop's electrical service.
NEW PowerPlasma 82i, 80 Amps, CNC Option, Plasma Cutter w/ IPT-80 torch
Choose the PowerPlasma 82i when your plasma cutting work regularly demands more current. It is the higher-output model here, rated at 80 amps, and it includes digital controlled circuitry and a digital air pressure gauge. The gauge is a practical tool if you need to watch for air pressure fluctuations during long cuts. The machine runs on 1-phase power, and it is a new Everlast unit. The title names the IPT-80 torch as the included torch. With an 80-amp output, this is the model that keeps heavier projects within reach. The trade-off is the listed price, which is higher than the 62i; for buyers who need maximum capacity in this comparison, the 82i is the one to choose.
NEW PowerPlasma 62i, 60 Amps, CNC Option, Plasma Cutter w/ IPT-60 torch
Choose the PowerPlasma 62i when 60 amps is enough for the material you cut. It is the lower-priced model in this pair, and its all-digital inverter platform is designed to deliver reliable cutting with less circuitry. The listed specifications show a 220/240V 1-phase power source and a 33-amp input amperage, which means it draws less input current than the 82i. The 220/240V power requirement and the 33-amp draw are the numbers to check against your existing service. This makes it a practical fit for workshops that do not need the larger unit's extra capacity. The limitation is the lower amperage: projects that push beyond 60-amp output will require the 82i instead. For lighter fabrication tasks and a lower upfront cost, the 62i is the more fitting choice.
Final choice by use case
If the material you cut regularly pushes past the lower output, the 82i is the one to buy. If the lower output meets your needs and the price difference matters to you, the 62i is the smart pick.
