Choosing a CNC-ready plasma cutter for your shop usually comes down to whether you need a large integrated table or a stand-alone unit you can pair with your own setup. On one side is a Koike Aronson CNC Plasma Cutter-II-510, a 2005 system listed at $11,442.50. On the other is a PowerEdge120 Plasma Cutter, a 120-amp 3-phase 440V unit listed at $3,999.00. The $7,443.50 price spread makes this a meaningful budget decision.
Quick verdict
If your priority is a complete cutting system with a large table, the Koike Aronson is the one. If you want a CNC-ready cutter that leaves room in your budget for a table, go with the PowerEdge120.
At a glance
| Feature | Koike Aronson CNC Plasma Cutter-II-510 | PowerEdge120 Plasma Cutter |
|---|---|---|
| Price | $11,442.50 | $3,999.00 |
| Condition | Used | New |
| CNC setup | Complete system with 5' x 10' table | CNC table ready, includes CNC cable |
| Inclusions | 5' x 10' cutting table | CNC torch, handheld cable, CNC cable, 10 consumables, air regulator, hose, ground clamp |
The two machines approach the job differently. The Koike is a full system that includes the table, so you can move from purchase to setup in one step. The PowerEdge is a cutter meant to be wired into a table you already have or will buy, and it comes with the cables and consumables to make that connection.
Where the Koike Aronson wins
The built-in table is the headline. Instead of sourcing a cutting bed separately, you get the machine and table together, which suits shops that regularly cut sheets or plates that size. That single package can simplify your floor planning.
Where the PowerEdge120 wins
The new unit costs $7,443.50 less and includes a long list of components: a remote control, air regulator, hose, ground clamp, 10 plasma torch consumables, a 26ft CNC torch cable, a handheld cable, and a CNC cable. The 5-year warranty adds coverage. For a shop that already has a table, this is the more affordable way to get CNC-ready cutting.
Product notes
Koike Aronson CNC Plasma Cutter-II-510
This used 2005 system centers on a 5' x 10' table, which is the main reason to choose it. You get a complete cutting package rather than a torch-to-table project. The table is large enough for sheet work and long parts, so shops that already handle those sizes don't need to build or buy a separate bed. The trade-off is its age and used condition; you're taking on a nearly two-decade-old machine, so you should expect to service it. For a shop that has the capability to maintain older equipment, the integrated table saves a step. But if you're looking for new-in-box reliability, this isn't it.
PowerEdge120 Plasma Cutter
This unit is rated at 120 amps and ships with a full kit: remote control, air regulator, hose, ground clamp, 10 torch consumables, a 26ft CNC torch cable, a handheld cable, and a CNC cable. The 5-year warranty is a real plus for a shop that wants coverage. The catch is that the kit doesn't include a cutting table; it's set up for the GOFABCNC table, and the description says other CNC tables may need a different CNC cable. So it's best for buyers who already have a table or are building one around it. For a new machine at a lower price, it gives you the core cutting technology while letting you choose the table that fits your floor space.
Final choice by use case
- Choose the Koike Aronson if you want an integrated system and the built-in table is the deciding factor.
- Choose the PowerEdge120 if you want a lower-priced, CNC-ready cutter and you're ready to supply or add a table.
