Plasma cutting sits between laser and waterjet in the cutting spectrum: it uses superheated, electrically conductive gas to slice through metal, and CNC control turns the torch into a repeatable fabrication tool. If you're exploring laser plasma waterjet cutting options, the first fork is system scope. Do you need a full CNC table, a power supply with a machine torch, or just a cutting surface for a torch you already own? These four listings cover that whole range, with listed prices from $149.95 to $11,442.50.
Quick Take
The Klutch Plasma Metal Cutting Table is a $149.95 open-box accessory for holding parts up to 250 lb. The Eastwood Versa-Cut 40 CNC Plasma Cutter is a $999.99 new unit with a machine torch and dual-voltage input. The PowerEdge120 Plasma Cutter jumps to $3,999.00 with a 120-amp, 3-phase 440V design that's CNC table ready. At the top, the Koike Aronson CNC Plasma Cutter-II-510 is a used industrial system with a 5' x 10' table for $11,442.50.
Listed-Price Comparison
| Product | Listed price | Price bar | Key specification |
|---|---|---|---|
| Klutch Plasma Metal Cutting Table 33" X 21" X 33" | USD 149.95 | Open-box table, 250 lb. max capacity | |
| Eastwood Versa-Cut 40 CNC Plasma Cutter With Machine Torch | USD 999.99 | New, machine torch included | |
| PowerEdge120 Plasma Cutter 120Amps, 3phase 440V, CNC table ready! (Blowback | USD 3,999.00 | 120-amp, CNC table ready | |
| Koike Aronson CNC Plasma Cutter-II-510, Advanced Cutting Systems, 5' x 10' Table | USD 11,442.50 | Used system, 5' x 10' table |
Decision Matrix
| Shopper need | Listed product to start with | Why it fits |
|---|---|---|
| A cutting surface for an existing torch | Klutch Plasma Metal Cutting Table | Low-cost table with 250 lb. capacity and open-box price |
| A new CNC-capable plasma cutter with torch | Eastwood Versa-Cut 40 | Machine torch, dual-voltage input, CNC-ready plug |
| Production cutting with a CNC table | PowerEdge120 | 120-amp output, CNC cable, 440V design |
| Large-format complete CNC system | Koike Aronson CNC Plasma Cutter-II-510 | 5' x 10' table in an industrial used package |
Product Notes
Klutch Plasma Metal Cutting Table 33" X 21" X 33"
This table is the low-cost starting point for a shop that already has a plasma cutter. The 33" x 21" x 33" frame is rated for 250 lb. max capacity, and the open-box condition puts the listed price at $149.95. The surface is meant for holding metal parts while you cut, not for generating a plasma arc. That's the main limitation: it can't serve as a standalone cutter. For a dedicated bench area where you want a practical surface for small fabrication pieces, the table is a useful add-on. Just pair it with a torch and power source you already own.
Koike Aronson CNC Plasma Cutter-II-510, Advanced Cutting Systems, 5' x 10' Table
The Koike Aronson is the complete-system answer for a shop that needs maximum cutting area. Listed at $11,442.50, it includes a 5' x 10' table and is described as an advanced cutting system for precision plasma operations. The catch is condition and age: it's a used 2005 unit, so you're buying an older industrial machine rather than a fresh-off-the-line model. The table footprint is the main reason to consider it-large sheets can be positioned and cut without manual repositioning. The trade-off is the price and floor space, which put it beyond a casual workshop and into production territory.
Eastwood Versa-Cut 40 CNC Plasma Cutter With Machine Torch Metal Steel Cutting
This $999.99 unit is the middle-ground option for someone building a CNC plasma setup. The included machine torch makes it a complete torch package, and the dual-voltage input lets it run on either 120V or 240V outlets. The listed description says it can cut steel, stainless steel, and aluminum from 24-gauge to 3/8" thick, and the blowback pilot arc is designed to reduce interference with CNC controls. It also has a rear-mounted 12-pin plug for wiring into a CNC table. The catch: this is a plasma cutter with a machine torch, not a complete motion table. You'll need to add a CNC table to use it as a full system.
PowerEdge120 Plasma Cutter 120Amps, 3phase 440V, CNC table ready! (Blowback
At $3,999.00, the PowerEdge120 brings 120-amp cutting to a CNC-ready package. The new unit includes a remote control, air regulator, hose, ground clamp, ten consumables, a 26-foot CNC torch cable, a CNC cable, and a handheld cable. Its 3-phase 440V input makes it a shop-grade machine, not a portable hobby unit. The description says it's a blowback, non-HF design that's ready for CNC table hookup; the intended match is the GOFABCNC table, with the option to ask about cabling for other CNC tables. The biggest limitation is the power source: a standard residential 120V or 240V outlet won't feed this machine.
Final Recommendation
Start with the Klutch table if you only need a cutting surface for parts up to 250 lb. Choose the Eastwood Versa-Cut 40 if you want a new CNC-capable plasma cutter with a machine torch at $999.99 and can supply a motion table. Pick the PowerEdge120 if your shop already has 3-phase 440V power and needs a 120-amp, CNC-ready cutter. Go with the Koike Aronson if you need a used industrial system with a 5' x 10' table and are prepared for its higher listed price.
