Quick Take
In the laser plasma waterjet cutting space, the biggest decision is whether you need a work surface, a standalone cutter, or a complete CNC system. The four listings here cover that range: a pure metal cutting table, two CNC-ready plasma cutters, and a used 5' x 10' CNC plasma system. Your existing shop equipment will point you to the right one.
What to Consider First
A table is not a cutter. The Klutch product is the only listing that is a cutting table, not a plasma cutter. The Eastwood Versa-Cut 40 and PowerEdge80 are cutters that require a CNC table to run as automated systems. The Koike Aronson is the only listing that combines the table and CNC control in one package. Deciding whether you already have a torch or table will narrow the choices before you compare prices.
Listed Price Comparison
| Product | Listed Price | Price Bar |
|---|---|---|
| Klutch Plasma Metal Cutting Table 33\" X 21\" X 33\"Metal Fabrication 250 lb. Max | USD 149.95 | |
| Eastwood Versa-Cut 40 CNC Plasma Cutter With Machine Torch Metal Steel Cutting | USD 999.99 | |
| PowerEdge80 Plasma Cutter,CNC table ready-100% Duty Cycle @ 80Amps 220V (PE85C | USD 2,699.00 | |
| Koike Aronson CNC Plasma Cutter-II-510, Advanced Cutting Systems, 5' x 10' Table | USD 11,442.50 |
The price spread here is wide because the products are not equivalent. The two mid-price entries are cutters only; the Klutch is a table only; the Koike bundles the table, torch, and CNC controls.
How to Choose
| If your priority is... | Consider... | Why |
|---|---|---|
| Adding a cutting surface for an existing torch | Klutch table | 33\" x 21\" work area with 250 lb. max capacity |
| Connecting a cutter to a CNC table | Eastwood Versa-Cut 40 | Includes machine torch and blowback pilot arc |
| Continuous automated cutting at higher amperage | PowerEdge80 | 80A, 220V, 100% duty cycle at 80A |
| A complete large-format CNC setup | Koike Aronson Cutter-II-510 | Combines table and CNC control in one listed system |
Product Notes
Klutch Plasma Metal Cutting Table 33\" X 21\" X 33\"Metal Fabrication 250 lb. Max
Listed at $149.95, the Klutch is a new open-box cutting table in black. It provides a 33\" x 21\" x 33\" frame and is rated to 250 lb. max capacity, so it works as a stable base when you have a plasma torch already. The main limitation is that this listing does not include a plasma cutter; the table is the entire product. It is also the smallest footprint in this group, which can be an advantage for a compact shop but means you are sizing for smaller workpieces. If you need a dedicated surface for manual plasma operation, this is the direct entry point.
Eastwood Versa-Cut 40 CNC Plasma Cutter With Machine Torch Metal Steel Cutting
The Eastwood Versa-Cut 40 is a new plasma cutter listed at $999.99. It ships as a CNC-ready unit with a machine torch, and the blowback pilot arc is intended to reduce interference when wired into CNC controls. The description notes it can cut steel, stainless steel, and aluminum from 24-gauge to 3/8\" thick, with dual voltage for 120V or 240V operation. The trade-off is that you need a CNC table with a compatible hookup to make it an automated system. As a standalone cutter, you would still need a table and workholding, so factor that into the total setup cost.
PowerEdge80 Plasma Cutter,CNC table ready-100% Duty Cycle @ 80Amps 220V (PE85C
The PowerEdge80 is a new CNC-table-ready cutter priced at $2,699.00. It is rated at 80 amps on 220V single phase with a 100% duty cycle at 80 amps, which positions it for longer cutting runs. The package includes a PE85C CNC torch, remote control, 30-foot cable, CNC cable, air regulator, ground cable, and 10 consumables. The limitation is that it requires 220V power and a CNC table to deliver its intended function; it is not a portable hand-held unit. The included accessories reduce the extra items you need to source before connecting it to a table.
Koike Aronson CNC Plasma Cutter-II-510, Advanced Cutting Systems, 5' x 10' Table
The Koike Aronson Cutter-II-510 is a used 2005 unit listed at $11,442.50. It comes as a complete CNC plasma system with a 5' x 10' table, making it the largest cutting area in this group. The condition is used, so you are getting a full production-style setup rather than a new machine. The limitation is the higher upfront cost and the age of the used unit. If your shop already has the power and floor space, this is the only listing that combines the table, torch, and CNC control in one package, which saves you from piecing a system together.
Final Recommendation by Use Case
- Already own a plasma torch: The Klutch table gives you a 250 lb. capacity cutting surface for the least money in this group.
- Building a CNC table: The Eastwood Versa-Cut 40 is a new CNC-ready cutter with dual voltage and a blowback pilot arc.
- Need higher amperage: The PowerEdge80 adds 80A output in a CNC-ready package.
- Want a full large-format system: The Koike Aronson combines table and CNC control in a used system.
