You're in the market for a CNC-ready plasma cutter in the laser, plasma, and waterjet cutting space, and the two new machines worth comparing take different paths to the same goal. One is a high-output machine; the other is a portable package designed to get you cutting on a CNC table. The deciding factors are the power supply in your shop and how much cutting output you actually need.
Quick Verdict
If you want the heavy-duty side of this comparison, the PowerEdge120 is the pick. If you want the practical CNC-ready package, the Everlast PowerPlasma 82i with the CNC package is the one to start with.
At a Glance
| Cutter | PowerEdge120 | Everlast PowerPlasma 82i |
|---|---|---|
| Listed price | USD 3,999.00 | USD 1,659.00 |
| Input amperage | 120 amps | 80 amps |
| Power input | 3-phase 440V | 1-phase |
| Cutter classification | Plasma cutter | Multi-process cutter |
| Condition | New | New |
Where Each Cutter Wins
The PowerEdge120 wins when your project list calls for the bigger machine and you want the package depth that comes with it. The Everlast PowerPlasma 82i wins when you want a more accessible setup for CNC work and a machine that's easier to move around.
Product Notes
PowerEdge120 Plasma Cutter
The PowerEdge120 is the higher-output option of the pair, and the bundle is ready for table work. Inside the package you get a remote control and cable, air regulator, hose, ground clamp, ten plasma torch consumables, a 26-ft PE120C straight CNC torch, a CNC cable, and a 26-ft handheld cable. That's a complete starting kit, not just a bare power supply. The 5-year warranty is a concrete plus for a bigger investment. The limitation is the power feed: this cutter requires 3-phase 440V, so it's not a machine for a shop that only has standard single-phase service. It also uses a blowback, non-HF start, which is worth knowing if you're used to high-frequency starting systems. If you can supply the right power, this is the one that brings the most to a CNC table setup.
Everlast PowerPlasma 82i with CNC Package
The Everlast package takes the opposite approach. It pairs the PowerPlasma 82i with the iPTM-80 CNC torch, so the torch side of a CNC setup is already handled. The Everlast is described as combining portability, power, and performance, and its single-phase current requirement makes it the more flexible fit for a typical shop. The limitation is the 80-amp input rating: it's below the PowerEdge120's amperage, so if you need the top end of the range, the larger machine is the stronger match. For a first CNC plasma cutter or a shop that wants a portable machine, the Everlast package is the more practical way in, and you get a CNC torch without sourcing one separately. Just keep the 80-amp ceiling in mind for heavier cuts.
Final Choice by Use Case
Choose the PowerEdge120 if you want the heavy-duty package and the $3,999 price fits your budget. Its bundled extras and 5-year warranty make it the complete buy for a shop that can supply the right power.
Choose the Everlast PowerPlasma 82i CNC package if the $1,659 price point is more in line with your project and you want a practical CNC setup. It's the more accessible way to get started on a tighter budget.
