Choosing between two 80-amp plasma cutters for a CNC setup usually comes down to budget versus bundle. You want enough cutting capacity for your work, but you also need the torch, cabling, and controls to actually run it from a table. In the laser, plasma, and waterjet cutting space, these two machines represent opposite ends of the spectrum: one comes as a CNC-ready kit with a long list of extras, while the other delivers the same amperage at a considerably lower listed price.
Quick verdict: If your priority is the lowest upfront cost in a CNC-capable machine, the PowerPlasma 82i is the price leader. If you'd rather have a single package that spells out the CNC torch, remote control, 30-foot cable, and consumables, the PowerEdge80 puts everything in one box.
Here's a quick look at how the two machines compare:
| Feature | PowerEdge80 | PowerPlasma 82i |
| Listed price | USD 2,699.00 | USD 1,359.00 |
| Amperage | 80 amps | 80 amps |
| CNC capability | CNC table ready, includes CNC cable | CNC capable |
| Torch | PE85C CNC torch (straight torch) | IPT-80 torch |
| Condition | New | New |
Where each product wins:
- The PowerEdge80 wins for CNC-table buyers who want a concrete list of included parts: remote control and cable, 30-foot cable, CNC cable, air regulator, hose, ground cable, and 10 plasma torch consumables.
- The PowerPlasma 82i wins on a lower listed price and digital features, with digital controlled circuitry and a digital air pressure gauge mentioned in the description.
PowerEdge80 Plasma Cutter (PE85C)
The PowerEdge80 is built around the idea of a complete CNC table setup. The package includes a PE85C CNC straight torch, a remote control and remote cable, a 30-foot cable, a CNC cable, an air regulator, a hose, a ground cable, and 10 plasma torch consumables. For someone wiring this into a GOFABCNC table, that's a ready-to-run bundle. The 100% duty cycle on 220V single phase is a clear headline spec. The limitation is that the included CNC cable is described as being set up for a GOFABCNC table; if you're using another brand's table, the description asks you to contact the seller for the correct CNC cable. That's not a deal-breaker, but it's a step to plan for before you buy. For someone who values a single-order solution, the packaging is the main reason to go this route.
PowerPlasma 82i with IPT-80 Torch
The PowerPlasma 82i takes a different approach: it's a 1-phase CNC-capable machine with a list price of $1,359. The title calls out the IPT-80 torch, and the description highlights digital controlled circuitry and a digital air pressure gauge for monitoring pressure fluctuations. That lower list price is the main reason to choose it if the amperage matches your needs. The trade-off is that the description focuses on the machine and torch, not on a long list of included cables and consumables. If you already have the hoses, ground cable, and consumables for your table, or you prefer to source them yourself, this price difference gives you room to do that.
Final choice by use case:
- Go with the PowerEdge80 if you're setting up on a GOFABCNC table and want a single box that includes the CNC torch, remote, cables, regulator, and consumables.
- Go with the PowerPlasma 82i if you want a leaner, machine-focused package with the IPT-80 torch and you're comfortable handling the cable and accessory side of your setup.
If you want the least expensive path to CNC plasma cutting, the PowerPlasma 82i is the straightforward pick. If you want the convenience of a package that spells out every connection, the PowerEdge80 is the one.
